CloudWalk Framework - Device configuration

  1. LOGICAL NUMBER
  2. COMMUNICATION
  3. MAGSTRIPE SETTINGS
  4. CLEAR THIS DEVICE
  5. CHECK S. NUMBER
  6. CLOUDWALK UPDATE
  7. ABOUT

To access the configuration menu, enter the password 55555. This password can be changed.

LOGICAL NUMBER

This option is used to define the device logical number.

More information regarding the use of logical numbers can be found at:

  1. CloudWalk Manager
  2. Integration

COMMUNICATION

This option is used to setup the device communication.

The following types of communication can be used (options may vary depending on device):

  • LOCAL NETWORK: Common local network (Ethernet)
  • LANDLINE (PPP): Landline/dial-up (PPP)
  • LANDLINE (SDLC): Landline/dial-up (SDLC)
  • GPRS: GPRS (Claro, Tim, Oi, etc)
  • WIFI: WIFI (wireless)

If your device does not show an option, for example, GPRS, it means that your device does not support that specific type of communication.

Details of the communication types

Each type of communication has a particular configuration process, as shown below:


1. Set the device IP address (eg 192.168.0.200). If you are using DHCP, the value 0.0.0.0 should be set.

NETWORK SETTINGS

DEVICE IP
:192.168.0.200

2. Set the subnet mask for the defined IP address class (eg 255.255.255.0).

NETWORK SETTINGS

SUBNET MASK
:255.255.255.0

3. Set the router/gateway IP address (eg 192.168.0.1).

NETWORK SETTINGS

ROUTER/GATEWAY
:192.168.0.1

4. Set the primary DNS server (eg 192.168.0.1).

NETWORK SETTINGS

DNS SERVER 1
:192.168.0.1

5. Set the secondary DNS server (eg 192.168.0.1).

NETWORK SETTINGS

DNS SERVER 2
:192.168.0.1

6. Set whether the device should use or not use SSL.

NETWORK SETTINGS

ENABLE SSL?

1.YES
2.NO

STATUS: DISABLED

1. Set the modem speed (eg 2400).

LANDLINE SETTINGS

MODEM SPEED
:2400

2. Set the internet provider's telephone number.

LANDLINE SETTINGS

PROVIDER PHONE
:11223344

3. Set the internet username. Some providers might require the complete username (eg [email protected]), while others might require only the short username.

LANDLINE SETTINGS

USERNAME
:username

4. Set the internet password.

LANDLINE SETTINGS

PASSWORD
:123456

5. Set whether the device should use or not use SSL.

LANDLINE SETTINGS

ENABLE SSL?

1.YES
2.NO

STATUS: DISABLED

1. Set the modem speed (eg 2400).

LANDLINE SETTINGS

MODEM SPEED
:2400

2. Set the internet provider telephone number.

LANDLINE SETTINGS

PROVIDER PHONE
:11223344

3. Set whether the device should use or not use SSL.

LANDLINE SETTINGS

ENABLE SSL?

1.YES
2.NO

STATUS: DISABLED

1. Set the mobile operator.

GPRS SETTINGS

1 CLARO
2 TIM
3 OI
4 VIVO
5 LYRA
6 OTHER OPERATOR

2. Set whether the device should use or not use SSL.

GPRS SETTINGS

ENABLE SSL?

1.YES
2.NO

STATUS: DISABLED

1. Set the name of the wireless network

WIFI SETTINGS

NETWORK NAME
:

2. Set the password of the wireless network

WIFI SETTINGS

PASSWORD
:

3. Set the protocol of the wireless network(ex: WEP 128-104).

WIFI SETTINGS

SECURITY PROTOCOL

1.WEP-128
2.WEP-64

STATUS: WEP-128

4. Set the device IP address (eg 192.168.0.200). If using DHCP, the value 0.0.0.0 should be set.

WIFI SETTINGS

DEVICE IP
:192.168.0.200

5. Set the subnet mask for the defined IP address class (eg 255.255.255.0).

WIFI SETTINGS

SUBNET MASK
:255.255.255.0

6. Set the router/gateway IP address (eg 192.168.0.1).

WIFI SETTINGS

ROUTER/GATEWAY
:192.168.0.1

7. Set the primary DNS server (eg 192.168.0.1).

WIFI SETTINGS

DNS SERVER 1
:192.168.0.1

Set the secondary DNS server (eg 192.168.0.1).

WIFI SETTINGS

DNS SERVER 2
:192.168.0.1

9. Set whether the device should use or not use SSL.

WIFI SETTINGS

ENABLE SSL?

1.YES
2.NO

STATUS: DISABLED

MAGSTRIPE SETTINGS

This option defines the parameters while swiping a magnetic stripe card.

MAGSTRIPE SETTINGS

0-T2/DIGIT/SWIPE
2-T2/SWIPE ONLY
4-T1/T2/DIGIT/SWIPE
255-T1/T2/SWIPE ONLY

The following parameters can be used:

  • 0-T2/DIGIT/SWIPE: Returns the track 2 and allow card swiping and manual entering
  • 2-T2/SWIPE ONLY: Returns the track 2 and allow only card swiping
  • 4-T1/T2/DIGIT/SWIPE: Returns the tracks 1 and 2 and allow card swiping and manual entering
  • 255-T1/T2/SWIPE ONLY: Returns the tracks 1 and 2 and allow only card swiping

CLEAR THIS DEVICE

This option is used to delete the device's applications and the parameters file.

ARE YOU SURE YOU
WANT TO CLEAR THIS
DEVICE?

APPS AND PARAMS WILL
BE REMOVED.

CHECK S. NUMBER

Displays the device serial number.

SERIAL NUMBER

123-456-789

CLOUDWALK UPDATE

This options is used to remotely update the CloudWalk Framework.

SELECT THE SIGNATURE

1. PAYTEC
2. TEFTI

ABOUT

Displays some device information, such as model and CloudWalk Framework version.

CLOUDWALK 2014

DEVICE MODEL:
ICT220

FRAMEWORK VERSION:
3.51